How To Change Mont Blanc Ink Cartridges

Below you volition discover, in gild from longest to shortest, the various ballpoint pen refill profiles (unique sizes and shapes) that tin be found in our database.

B3 Cone Ballpoint Refill

Standard: B3
Length: 120 mm to 140 mm

The B3 is a stick refill with a cone-shaped tip. These refills can come in various lengths but usually vary between 120 and 140 mm. The BIC Cristal is the about obvious case of this refill type.

Nippon Type Ballpoint Refill

Standard: Japan Type
Length: Various

Nihon Blazon refills are stick refills of various lengths. The trunk of the refill is unremarkably plastic, and it can exist crimped to agree a leap in place on retractable pens. These refills usually tend to exist at least 100 mm in length, but there are numerous exceptions.

C1 Ballpoint Refill

Standard: C1
Length: 117.v mm (iv.625″)

The C1 is a Cross Fashion ballpoint pen refill. The official ISO standard length is 117.4mm, just nigh of these refills actually mensurate out to 117.5mm, or exactly four.625″. This refill is a long metal or plastic tube with a threaded, knurled knob on the back.

Cross Style C1 Ballpoint Refill

Standard: C1
Length: 115.9 mm (4.5625″)

Official Cross C1 refills are 115.9 mm in length vs. the 117.iv mm ISO standard length. They are a metallic or plastic body with a threaded, knurled knob at the back. Jaymo and Monteverde brand substitutes for this refill.

S.T. Dupont Ballpoint C1 Style Refill

Standard: C1
Length: 112.viii mm (four.44″)

The S.T. Dupont Ballpoint C1 style refill is similar to a Cross standard ballpoint. However, information technology is a petty shorter than the Cross standard. This is a metal tube refill with a threaded, knurled knob on the rear. Monteverde also makes a refill that matches this profile.

Summit European Length Ballpoint Refill

Standard: Fits about pens that use standard ceramic rollerball (RB)
Length: 111.i mm (four.375″)

Meridian Studios offers two ballpoint refills that will fit most pens that have a standard ceramic rollerball. These refills are really Schmidt P900 or easyFLOW 9000 Parker mode G2 refills with a neckband near the tip and extra adapter cap on the rear to allow them to fit in standard rollerball pens. There are a couple other refill makers that ship some G2 refills with these adapter parts for the same purpose.

Waterman Ballpoint Refill

Standard: None
Length: 111.ane mm (four.375″)

The Waterman ballpoint refill has a unique size and shape, and it will just fit their ballpoint pens. Jaymo, Monteverde, and other third party refill makers offering this refill as well.

A2 (formerly A3) Retractable Ballpoint Refill

Standard: A2 (formerly A3)
Length: 106.viii mm (4.2″)

Refills that friction match the ISO A2 ballpoint standard are available from numerous pen and refill makers. This standard was formerly known as the A3. These are metal or plastic body stick refills for retractable pens with a slim tip and spring shoulder (wing, crimp, pinch) that is 33.4 mm from the tip of the refill. The Schneider Limited 75 and Schmidt 700 are examples of this standard.

X20 Retractable Ballpoint Refill

Standard: X20
Length: 106.viii mm (four.ii″)

Refills that friction match the ISO X20 ballpoint standard are available from numerous pen and refill makers. These are metal or plastic body stick refills for retractable pens with a spring shoulder (fly, crimp, compression) that is 27 mm from the tip of the refill. The tip on these refills is not every bit narrow as on the A2. The Schneider Express 775 is an example of this standard.

X20 Large Capacity Ballpoint Refill

Standard: X20 Large Capacity
Length: 106.viii mm (4.2″)

Refills that match the ISO X20 big capacity ballpoint standard are metal or plastic body refills for retractable or non-retractable pens. They are the aforementioned length as a regular X20 simply have a wider torso for higher ink chapters. No bound shoulder is needed because the wide section of the body serves that purpose. The Starminen StarLiner and discontinued Schneider Express 740 are the only readily available examples of this refill standard.

G1 Ballpoint Refill

Standard: G1
Length: 106.viii mm (4.2″)

Refills that lucifer the ISO G1 standard generally replaced the X20 Large Capacity standard. They differ from the the X20 primarily in the tip expanse, which is thinner. The Schneider Express 225 is the benchmark example of this standard. A common refill that is substantially a G1 is the discontinued Paper Mate Lubriglide. This refill is fairly hard to discover for a reasonable toll, only virtually G1 refills should fit these much older Paper Mate pens. A user of this site did recently report that two dissimilar G1 refills did not fit his Lubriglide pen.

Caran d'Ache Frosty 828 888 Ballpoint Refill

Standard: None
Length: 106 mm (4.17″)

The Caran d'Ache Frosty 828 ballpoint refill will only fit their Frosty and Space ballpoint pens. This refill will not fit pens from whatever other brand.

Lamy M16 Ballpoint Refill

Standard: None
Length: 106 mm (4.17″)

The Lamy M16 ballpoint refill only fits certain Lamy ballpoint pens. Jaymo and Monteverde make substitutes for this refill.

Platignum Slimline No. 9 Ballpoint Refill

Standard: None
Length: 102.9 mm (4.05″)

The Platignum Slimline No.ix Ballpoint refill is a unique length metallic stick refill that will only fit in some Platignum pens.

Cross Slim (Selectip) 8783 Ballpoint Refill

Standard: None
Length: 101.8 mm (4″)

Cross slim Selectip pens are primarily designed for their rollerball refills, just they do make a ballpoint refill to fit these pens. The Slim Ballpoint 8783 refill is the compatible refill in ballpoint course. Jaymo and other third party makers offering substitutes for this refill.

eastward+m Holzprodukte Clutch 4058 Ballpoint Refill

Standard: None
Length: 98.iv mm (3.875″)

This refill is a specialized version of a Parker way G2. The previous version was simply a G2 with a collar to make it fit inside the e+m Holzprodukte clutch pencils without moving and flexing likewise much. The new version is specifically designed to fit those pencils.

Montblanc Ballpoint Refill

Standard: None
Length: 98.4 mm (iii.875″)

The Montblanc ballpoint refill is a proprietary size and shape that will not fit pens by any other maker. Jaymo, Monteverde, and other third party refill makers offer uniform refills.

Parker Style G2 Ballpoint Refill

Standard: G2
Length: 98.four mm (iii.875″)

The Parker style standard G2 ballpoint refill is the most common pen refill on the market place. Numerous pen and refill makers offer gel and ballpoint refills that match this standard. The official ISO standard length is 98.1 mm, but most of these refills measure out to 98.4 mm, or exactly 3 7/eight″. However, they can vary from 98 mm to 99 mm due to manufacturing tolerances. These refills are sometimes referred to as "jumbo" or "giant." Note that the G2 standard is different from the Pilot G2 Pen and its refills. Those refills are like in size and shape to a standard rollerball. This is a keen source of confusion in the pen refill market.

Caran d'Anguish Goliath Ballpoint Refill

Standard: None
Length: 96.8 mm (3.81″)

The Caran d'Ache Goliath ballpoint refill is a proprietary refill that will only fit sure Caran d'Anguish pens.

Fisher Pressurized Mini Universal U Ballpoint Refill

Standard: None
Length: 96.8 mm (3.81″)

The Fisher Pressurized Mini Universal ballpoint refill is a metal body pressurized stick refill. This refill tin can exist cut off to be 88.ix mm or 66.7 mm in length to fit shorter pens.

Sheaffer Thou Style Ballpoint Refill

Standard: None
Length: 95.3 mm (iii.75″)

The Sheaffer Thou Style ballpoint refill is a proprietary size and shape that only fits certain Sheaffer and Sailor ballpoint pens. The Sailor Standard ballpoint refill also has the same size and shape. The Sheaffer and Sailor refills should fit each other's pens. Jaymo and Monteverde make substitutes for this refill.

Cartier Slimline Ballpoint Refill

Standard: None
Length: 95.three mm (3.75″)

The Cartier Slimline is a proprietary length and shape refill that volition only fit older Cartier Must, Panthere, and Vendome ballpoint pens. This refill is fairly difficult to find. It is unremarkably simply available on the 2nd-paw market.

Waterman Titane CF Ballpoint Refill

Standard: None
Length: 95.three mm (3.75″)

The Waterman Titan / Titane CF is a proprietary length and shape refill that will only fit older Waterman ballpoint pens. This refill is adequately difficult to observe. It is normally merely available on the second-hand market.

Platinum Ballpoint Refill

Standard: None
Length: 93 mm (3.66″)

Platinum makes a unique size and shape refill that will just fit some of their ballpoint pens. This refill comes in a plastic version, the BSP-100N, and a metal trunk version, the BSP-200B.

Zebra F Ballpoint Refill

Standard: None
Length: 88.9 mm (3.5″)

The Zebra F ballpoint refill fits some Zebra ballpoint pens. It has a similar profile to the Fisher Space Pen compatible refills, and then it will fit in some other pens of that profile. The F refill comes in a plastic body version and an older metal body version.

Pilot Center of Gravity Ballpoint Refill

Standard: None
Length: 86.5 mm (iii.iv″)

The Pilot Center of Gravity ballpoint refills will only fit Airplane pilot Center of Gravity pens. There is a plastic body version and a metal body version of this refill.

Schmidt MegaLine 4876 Ballpoint Refill

Standard: None
Length: 76.two mm (3″)

The Schmidt MegaLine 4876 is a pressurized ballpoint refill that will fit various small pens that take jumbo refills.

Standard Multifunction D1 Ballpoint Refill

Standard: D, D1, multifunction
Length: 66.seven mm (2.625″)

The standard multifunction refill is also known as the ISO D1 refill. It goes by various other names: D, D1, mini D, and mini D1. Officially the standard is 67 mm long, only near refills measure out at 66.7 mm, or 2 v/8″. Yet, these refills can measure anywhere betwixt 66 mm and 67 mm. Most every pen and refill maker offers at least ane refill that matches this standard. Some of these refills come with a threaded, knurled rear knob. Numerous Swarovski and other crystal pens take a D1 with the knob. Be certain to go along the original knob and/or metallic sleeve to apply with new refills.

Lamy M22 Mini Ballpoint Refill

Standard: None
Length: threescore.3 mm (2.375″)

The Lamy M22 mini ballpoint refill has a unique size and shape that will just fit some Lamy ballpoint pens and i pen from LOCLEN.

Troika Micro Ballpoint Refill

Standard: D
Length: 44.five mm (1.75″)

The Troika micro ballpoint refill is designed to fit in their keyring pens. This is the smallest ISO D standard refill. Theirs comes with a threaded, knurled rear knob, but that can be removed.

Cantankerous Matrix 8572 Ballpoint Refill

Standard: None
Length: 35.eight mm (ane.4″)

The Cross Matrix 8572 ballpoint refill will only fit certain Cantankerous Ion and Matrix pens. It will likewise fit a few similar Sheaffer models.